Name: Lead Selenide Wafer
CAS: 12069-00-0
EC Number: 235-109-4
Chemical Formular: PbSe
Appearance: wafer
Molecular Weight: 286.171 g/mol
Melting Point: 1,078 °C (1,972 °F; 1,351 K)
Boiling Point: n/a
Density: 8.1 g/mL at 25 °C
Solubility in water: n/a
Exact Mass: 287.893 g/mol
Monoisotopic Mass: 287.893 g/mol
Topological Polar Surface Area: 0 A^2
Complexity: 2
MATERIAL SAFETY DATA SHEETS
According to the UN GHS revision 8
SECTION 1: Identification
1.1
GHS Product identifier
| Product name | Lead Selenide Wafer |
|---|
1.2
Other means of identification
| Product number | – |
|---|---|
| Other names | – |
1.3
Recommended use of the chemical and restrictions on use
| Identified uses | Industrial and scientific research uses. |
|---|---|
| Uses advised against | no data available |
1.4
Supplier’s details
| Company | Elements China Limited |
|---|---|
| Address | Building 2, No.5555, Shenzhuan Hwy, Shanghai , China |
| Telephone | +86-021-3776-2181 |
1.5Emergency phone number
| Emergency phone number | +86-021-3776-2181 |
|---|---|
| Service hours | Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours). |
SECTION 2: Hazard identification
2.1
Classification of the substance or mixture
Acute toxicity – Category 3, Oral
Acute toxicity – Category 4, Inhalation
Reproductive toxicity, Category 1A
Specific target organ toxicity – repeated exposure, Category 2
Hazardous to the aquatic environment, short-term (Acute) – Category Acute 1
Hazardous to the aquatic environment, long-term (Chronic) – Category Chronic 1
2.2
GHS label elements, including precautionary statements
| Pictogram(s) | 
|
|---|---|
| Signal word | Danger |
| Hazard statement(s) | H301 Toxic if swallowed H302 Harmful if swallowed H331 Toxic if inhaled H332 Harmful if inhaled H360 May damage fertility or the unborn child H373 May cause damage to organs through prolonged or repeated exposure H410 Very toxic to aquatic life with long lasting effects |
| Precautionary statement(s) | |
| Prevention | P264 Wash … thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P203 Obtain, read and follow all safety instructions before use. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/… P260 Do not breathe dust/fume/gas/mist/vapours/spray. P273 Avoid release to the environment. |
| Response | P301+P316 IF SWALLOWED: Get emergency medical help immediately. P321 Specific treatment (see … on this label). P330 Rinse mouth. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P317 Get medical help. P318 IF exposed or concerned, get medical advice. P319 Get medical help if you feel unwell. P391 Collect spillage. |
| Storage | P405 Store locked up. |
| Disposal | P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal. |
2.3
Other hazards which do not result in classification
no data available
SECTION 3: Composition/information on ingredients
3.1
Substances
| Chemical name | Common names and synonyms | CAS number | EC number |
|---|---|---|---|
| Lead Selenide Wafer | – | 12069-00-0 | 235-109-4 |
SECTION 4: First-aid measures
4.1
Description of necessary first-aid measures
If inhaled
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Following skin contact
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Following eye contact
Rinse with pure water for at least 15 minutes. Consult a doctor.
Following ingestion
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
4.2
Most important symptoms/effects, acute and delayed
no data available
4.3
Indication of immediate medical attention and special treatment needed, if necessary
no data available
SECTION 5: Fire-fighting measures
5.1
Suitable extinguishing media
Use dry chemical, carbon dioxide or alcohol-resistant foam.
5.2
Specific hazards arising from the chemical
no data available
5.3
Special protective actions for fire-fighters
Wear self-contained breathing apparatus for firefighting if necessary.
SECTION 6: Accidental release measures
6.1
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
6.2
Environmental precautions
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
6.3
Methods and materials for containment and cleaning up
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.
SECTION 7: Handling and storage
7.1
Precautions for safe handling
Handling in a well ventilated place.
Wear suitable protective clothing.
Avoid contact with skin and eyes.
Avoid formation of dust and aerosols.
Use non-sparking tools.
Prevent fire caused by electrostatic discharge steam.
7.2
Conditions for safe storage, including any incompatibilities
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
SECTION 8: Exposure controls/personal protection
8.1
Control parameters
Occupational Exposure limit values
no data available
Biological limit values
no data available
8.2
Appropriate engineering controls
Ensure adequate ventilation.
Handle in accordance with good industrial hygiene and safety practice.
Set up emergency exits and the risk-elimination area.
8.3Individual protection measures, such as personal protective equipment (PPE)
Eye/face protection
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Skin protection
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Respiratory protection
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
Thermal hazards
no data available
SECTION 9: Physical and chemical properties and safety characteristics
| Physical state | lead gray crystalline |
|---|---|
| Colour | no data available |
| Odour | no data available |
| Melting point/freezing point | 1065ºC |
| Boiling point or initial boiling point and boiling range | no data available |
| Flammability | no data available |
| Lower and upper explosion limit/flammability limit | no data available |
| Flash point | no data available |
| Auto-ignition temperature | no data available |
| Decomposition temperature | no data available |
| pH | no data available |
| Kinematic viscosity | no data available |
| Solubility | no data available |
| Partition coefficient n-octanol/water | no data available |
| Vapour pressure | no data available |
| Density and/or relative density | 8.1g/mLat 25°C(lit.) |
| Relative vapour density | no data available |
| Particle characteristics | no data available |
SECTION 10: Stability and reactivity
10.1
Reactivity
no data available
10.2
Chemical stability
no data available
10.3
Possibility of hazardous reactions
no data available
10.4
Conditions to avoid
no data available
10.5
Incompatible materials
no data available
10.6
Hazardous decomposition products
no data available
SECTION 11: Toxicological information
Acute toxicity
- Oral: no data available
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
no data available
STOT-repeated exposure
no data available
Aspiration hazard
no data available
SECTION 12: Ecological information
12.1
Toxicity
- Toxicity to fish: no data available
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
12.2
Persistence and degradability
no data available
12.3
Bioaccumulative potential
no data available
12.4
Mobility in soil
no data available
12.5
Other adverse effects
no data available
SECTION 13: Disposal considerations
13.1
Disposal methods
Product
The material can be disposed of by removal to
a licensed chemical destruction plant or by controlled incineration
with flue gas scrubbing. Do not contaminate water, foodstuffs,
feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging
Containers can be triply rinsed (or equivalent) and
offered for recycling or reconditioning.
Alternatively, the packaging can be punctured to
make it unusable for other purposes and then be disposed of
in a sanitary landfill. Controlled incineration
with flue gas scrubbing is possible for combustible packaging materials.
SECTION 14: Transport information
14.1
UN Number
| ADR/RID: UN3283 (For reference only, please check.) | IMDG: UN3283 (For reference only, please check.) | IATA: UN3283 (For reference only, please check.) |
14.2
UN Proper Shipping Name
| ADR/RID: SELENIUM COMPOUND, SOLID, N.O.S. (For reference only, please check.) | IMDG: SELENIUM COMPOUND, SOLID, N.O.S. (For reference only, please check.) | IATA: SELENIUM COMPOUND, SOLID, N.O.S. (For reference only, please check.) |
14.3
Transport hazard class(es)
| ADR/RID: 6.1 (For reference only, please check.) | IMDG: 6.1 (For reference only, please check.) | IATA: 6.1 (For reference only, please check.) |
14.4
Packing group, if applicable
| ADR/RID: I (For reference only, please check.) | IMDG: I (For reference only, please check.) | IATA: I (For reference only, please check.) |
14.5
Environmental hazards
| ADR/RID: Yes | IMDG: Yes | IATA: Yes |
14.6
Special precautions for user
no data available
14.7
Transport in bulk according to IMO instruments
no data available
SECTION 15: Regulatory information
15.1
Safety, health and environmental regulations specific for the product in question
| Chemical name | Common names and synonyms | CAS number | EC number |
|---|---|---|---|
| Lead Selenide Wafer | – | 12069-00-0 | 235-109-4 |
| European Inventory of Existing Commercial Chemical Substances (EINECS) | Listed. | ||
| EC Inventory | Listed. | ||
| United States Toxic Substances Control Act (TSCA) Inventory | Listed. | ||
| China Catalog of Hazardous chemicals 2015 | Listed. | ||
| New Zealand Inventory of Chemicals (NZIoC) | Not Listed. | ||
| Philippines Inventory of Chemicals and Chemical Substances (PICCS) | Not Listed. | ||
| Vietnam National Chemical Inventory | Not Listed. | ||
| Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) | Not Listed. | ||
| Korea Existing Chemicals List (KECL) | Listed. | ||
SECTION 16: Other information
Information on revision
| Creation Date | Sep 30, 2020 |
|---|---|
| Revision Date | Sep 30, 2020 |
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS – The International Chemical Safety Cards (ICSC), website:
http://www.ilo.org/dyn/icsc/showcard.home - HSDB – Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC – International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal – The Global Portal to Information on Chemical Substances by OECD, website:
http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en - CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG – Emergency Response Guidebook by U.S. Department of Transportation, website:
http://www.phmsa.dot.gov/hazmat/library/erg - Germany GESTIS-database on hazard substance, website:
http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp - ECHA – European Chemicals Agency, website: https://echa.europa.eu/
Any questions regarding this SDS, Please send your inquiry to [email protected]
Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information in this document is based on the present state of our
knowledge and is applicable to the product with regard to appropriate safety precautions. It does not
represent any guarantee of the properties of the product. We as supplier shall not be held liable for any
damage resulting from handling or from contact with the above product.
| Chemical Formular: | PbSe |
| PubChem CID: | 61550 |
| IUPAC Name: | selanylidenelead |
| Inchl: | InChI=1S/Pb.Se |
| InChI Key: | GGYFMLJDMAMTAB-UHFFFAOYSA-N |
| Canonical SMILES: | [Se]=[Pb] |
| Pictogram(s): |  |
| Signal: | Danger |
| GHS Hazard Statements: | H301 + H331-H302 + H332-H360Df-H373-H410 |
| Hazard Codes: | T,N |
| Risk Codes: | R60-61-23/25-33-50/53 |
| Precautionary Statement Codes: | Missing Phrase – N15.00950417-P201-P260-P280-P304 + P340 + P312-P308 + P313 |
| Flash Point: | n/a |
n/a
n/a
Lead (/ˈlɛd/) is a chemical element with the symbol Pb (from the Latin plumbum) and atomic number 82.
It is a heavy metal that is denser than most common materials.
Lead is soft and malleable, and also has a relatively low melting point. When freshly cut, lead is silvery with a hint of blue; it tarnishes to a dull gray color when exposed to air.
Lead has the highest atomic number of any stable element and three of its isotopes are endpoints of major nuclear decay chains of heavier elements.
Selenium is a chemical element with the symbol Se and atomic number 34.
It is a nonmetal (more rarely considered a metalloid) with properties that are intermediate between the elements above and below in the periodic table, sulfur and tellurium, and also has similarities to arsenic.
It rarely occurs in its elemental state or as pure ore compounds in the Earth’s crust. Selenium (from Ancient Greek σελήνη (selḗnē) “Moon”) was discovered in 1817 by Jöns Jacob Berzelius, who noted the similarity of the new element to the previously discovered tellurium (named for the Earth).
Selenium is found in metal sulfide ores, where it partially replaces the sulfur.
Commercially, selenium is produced as a byproduct in the refining of these ores, most often during production. Minerals that are pure selenide or selenate compounds are known but rare.
Fiber drums, steel drums, and bulk bags
